Prosave Co Incorp manufactures Corrugated Jacketed Gaskets for heat exchanger and pressure vessel applications subject to cyclic temperature and pressure conditions. The corrugated metal shell enclosing the asbestos free filler increases gasket resistance and creates a labyrinth sealing effect at the inner edge, reducing the risk of bypass leakage. Also available with a corrugated metal insert in a 3 ply construction for enhanced resistance to cyclic thermal loading. Available in standard DIN and ASME dimensions and custom sizes up to 5000 mm.

Prosave Co Incorp manufactures the Double Shell Double Jacketed Gasket for flanged connections requiring elevated mechanical strength and rigidity beyond that achievable with a standard double jacketed construction. Two reversed and overlapping metal shells fully enclose the soft filler, creating a robust sealing element suited to high load heat exchanger and pressure vessel service in demanding oil and gas environments. Available in standard DIN and ASME dimensions as well as custom sizes up to 5000 mm.

Prosave Co Incorp manufactures Double Jacketed Gaskets for heat exchanger and pressure vessel flanged connections requiring complete enclosure and protection of the soft filler material. The filler is fully enclosed within a metal shell and secured by an overlapping top washer, providing additional support at the outer flange edges. Available in standard DIN and ASME flange dimensions as well as fully customised sizes up to 5000 mm.

Prosave Co Incorp manufactures Full Face Gaskets for ASME/ANSI Class 150 pipe flanges, cut to cover the entire flange face including the bolt holes. Designed for flat face flange connections where full face contact is required to prevent flange distortion under bolt load, these gaskets are available in pipe sizes from 1/2 inch to 96 inches, a wide range of thicknesses, and an extensive selection of materials including elastomers, engineered graphite, PTFE, and compressed fibre grades.

Prosave Co Incorp manufactures Ring Gaskets for ASME/ANSI Class 150 pipe flanges, cut to fit within the raised face seating area of the mating flanges. Available across a broad range of pipe sizes from 1/2 inch to 96 inches and in a wide selection of materials and thicknesses, these gaskets are suited to oil and gas, refinery, water treatment, power generation, and general industrial piping applications. Standard thicknesses of 1/16 inch and 1/8 inch are available, with additional thicknesses manufactured to order.

<p class="font-claude-response-body break-words whitespace-normal leading-[1.7]">Prosave Co Incorp manufactures the Corrugated Graphite Gasket in Class 300 rating for heat exchanger and higher pressure flanged connection service. The corrugated 316 stainless steel core is fully encapsulated within a flexible graphite sealing element, providing reliable sealing performance across a wide temperature range including thermal cycling conditions. Available in sizes from 1/2 inch to 24 inches.</p>

Prosave Co Incorp manufactures the Corrugated Graphite Gasket in Class 150 rating as a semi metallic sealing element designed for heat exchangers and low to medium pressure flanged connections. The corrugated 316 stainless steel metal core is fully encapsulated within a flexible graphite sealing element, combining the resilience of graphite with the structural integrity of a metal substrate. Available in sizes from 1/2 inch to 24 inches.

Prosave Co Incorp manufactures the Kammprofile Gasket to EN 12560-6 for use with flange systems conforming to EN 1759-1. Covering pressure classes from Class 150 to Class 2500, this gasket is available in standard and convex groove profiles with integrated or loose centering ring configurations, suitable for raised face ANSI and EN flanged connections in demanding oil and gas service.

Prosave Co Incorp manufactures the Kammprofile Gasket to the WN101 works standard for use with DIN flange systems across pressure ratings from PN10 to PN250. Available in standard and convex groove profiles with integrated or loose centering ring options, this gasket is produced to customer specific dimensional and material requirements where standard EN designations do not apply.